 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP161G TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP161G Triac Drive Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA mini flat coupler TLP161G is a small outline coupler, suitable for surface mount assembly. The TLP161G consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode. * * * * * * Zero-voltage crossing turn-on Peak off-state voltage: 400V(min.) Trigger LED current: 10mA(max.) On-state current: 70mA(max.) Isolation voltage: 2500Vrms(min.) UL recognized: UL1577, file no. E67349 TOSHIBA Weight: 0.09 g 11-4C3 Trigger LED Current Classi- fication* (IFT5) (IFT7) Standard Trigger LED Current (mA) VT=3V, Ta=25C Min. Max. 5 7 10 Marking Of Classification T5 T5, T7 T5, T7, blank Pin Configurations 1 6 *Ex. (IFT5); TLP161G(IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP161G(IFT5): TLP161G 3 ZC 1. ANODE 3. CATHODE 4. TERMINAL 1 6. TERMINAL 2 4 1 2007-10-01 TLP161G Absolute Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 53C) LED Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol (Note) BVS Rating 50 -0.7 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms Peak forward current (100s pulse, 100pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Ta=25C Ta=70C 1 5 125 400 70 40 -0.67 Detector On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (PW=10ms, DC=10%) Junction temperature 2 1.2 115 -55~125 -40~100 Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1min., R.H. 60%) 260 2500 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP161G Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Symbol VF IR CT IDRM VTM IH dv / dt dv / dt(c) IF=10mA VR=5V Test Condition Min. 1.0 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 1000 2.8 Unit V A pF nA V mA V / s V / s Reverse current Capacitance Peak off-state current Peak on-state voltage V=0, f=1MHz VDRM=400V ITM=70 mA Vin=120Vrms, Ta=85C Vin=30Vrms, IT=15mA (Fig.1) (Fig.1) Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage 200 Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Inhibit voltage Leakage in inhibited state Capacitance (input to output) Isolation resistance Symbol IFT VIH IIH CS RS VT=3V IF=rated IFT IF=rated IFT VT=rated VDRM VS=0, f=1MHz VS=500V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Test Condition Min. 1x10 12 Typ. 5 100 0.8 10 14 Max. 10 40 300 Unit mA V A pF Vrms Vdc 2500 5000 5000 Fig.1 dv / dt test circuit Rin VCC + - 120 Vin 1 3 6 4 RL 2k 5VVCC dv / dt (c) dv / dt 0V 3 2007-10-01 TLP161G IF - Ta 60 120 IT(RMS) - Ta 50 100 40 R.M.S. on-state current IT(RMS) (mA) 40 80 100 120 Allowable forward current IF (mA) 80 30 60 20 40 10 20 0 -20 0 -20 0 20 60 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 3000 Pulse width 100 s Ta = 25C 100 50 Ta = 25C IF - VF Allowable pulse forward current IFP (mA) 1000 500 300 (mA) IF Forward current 10-3 10-2 10-1 100 30 10 5 3 100 50 30 1 0.5 0.3 0.1 0.6 10 3 3 3 3 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF / Ta - IF -3.2 1000 IFP - VFP IFP (mA) Pulse forward current 500 300 Forward voltage temperature coefficient VF / Ta (mV / C) -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 100 50 30 10 5 3 1 0.6 Pulse width 10 s Repetitive frequency = 100 Hz Ta = 25C 1.0 1.4 1.8 2.2 2.6 3.0 0.3 1 3 10 30 50 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2007-10-01 TLP161G Normalized IFT - Ta 3 VT = 3V 2 3 2 Normalized IH - Ta Trigger led current IFT (arbitrary unit) Holding current I (arbitrary unit) -20 0 20 40 60 80 100 1.2 1 1.2 1 0.5 0.3 0.5 0.3 0.1 -40 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized IDRM - Ta 103 1.4 Normalized VDRM - Ta Off-state output terminal voltage VDRM (arbitrary unit) VDRM = Rated 1.2 Peak off-state current IDRM (arbitrary unit) 102 1.0 0.8 10 1 0.6 0.4 100 0 20 40 60 80 100 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized VIH - Ta 3 2 3 2 Normalized IIH - Ta Inhibit voltage VIH (arbitrary unit) Inhibit current IIH (arbitrary unit) IF = Rated IFT 1.2 1 1.2 1 0.5 0.3 0.5 0.3 IF = Rated IFT VT = Rated VDRM 0.1 -40 -20 0 20 40 60 80 100 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 5 2007-10-01 TLP161G RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01 |
Price & Availability of TLP161G07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |